You are here: Home / Campus Health and Safety / General Safety / Occupational Safety / Welding Torching and Brazing Safety

Training ScheduleTraining Calendar.png

Welding, Torching and Brazing Safety 

Background

Photo of someone welding, using gloves, welding shield.Welding, flame cutting and brazing are common activities in UWO maintenance, shop and instructional areas.

Supervisors and instructors must ensure all equipment is code-compliant, in safe working order and that users are properly trained in the safe use of the equipment.

Please direct any questions regarding safety procedures to your supervisor or instructor or the University Safety Office.

General Rules for Welding at UWO Include:

  • Know the hazards of the material(s) you are working with. Contact your supervisor or instructor for Safety Data Sheets (SDS). Please contact the Campus Safety Office (x4484) for air monitoring / exposure evaluation to welding fumes.
  • There are specific fire safety requirements for welding, flame cutting and other "hot work" at UWO. Please see the following links or call Campus Safety Office (x4484) for additional information.
  • Precautions such as isolating welding and cutting, removing fire hazards and combustibles and providing a fire watch for fire prevention shall be taken in areas where welding or other "hot work" is performed.
  • A "fire watch" shall be provided during the work and maintained for at least 1 hour after welding, flame cutting or other "hot work" has been completed. The "fire watch" is responsible for monitoring the entire operation to ensure that a fire has not started and to quickly extinguish any small fires that may ignite.
  • A fire extinguisher must be located adjacent to the activity and should be immediately available to the fire watch. The individual assigned to fire watch duties should not have other functions to perform and should maintain a constant watchfulness over the operation.
  • Eye protection shall be worn. Other persons adjacent to the welding area shall be protected by noncombustible or flameproof screens or shields and shall wear appropriate eye protection.
  • In shops, studios and laboratories use the exhaust ventilation such as snorkel hoods and capture hoods to minimize your exposure to welding fumes. Contact your supervisor or instructor for instructions on the proper use and limitations of this safety equipment.

 

Other Resources:

Document Actions

The University of Wisconsin Oshkosh — Where Excellence and Opportunity Meet.